materi tugas jarkom 2

pada materi kuliah jarom 2, pak pur memberi tugas menghubungkan 2 buah router dan 2 buah pc beserta swichnya menggunakan cisco packet tracer.
berikut solusinya.  :D

konfigurasi untuk router0 adalah



Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface FastEthernet0/0
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#ip address 192.168.0.1 255.255.255.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface FastEthernet0/1
Router(config-if)#no shutdown


%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up.

konfigurasi untuk router1 adalah



Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface FastEthernet0/0
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#ip address 192.168.2.1 255.255.255.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface FastEthernet0/1
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#ip address 192.168.1.2 255.255.255.0
Router(config-if)#

dan untuk menghubungkan kedua router menggunakan RIP(routing information protocol) yang konfigurasinya sebagai berikut.

untuk konfigurasi RIP di router0


Router(config)#router rip
Router(config-router)#network 192.168.0.0
Router(config-router)#network 192.168.1.0

untuk konfigurasi RIP di router1


Router(config)#router rip
Router(config-router)#network 192.168.1.0
Router(config-router)#network 192.168.2.0




Semoga bermanfaat. mohon maaf jika ada kesalahan dalam posting ini .